SnowTec - Ultimate Bundle 10.2026 STANDALONE, VST3 for Windows

• Rare Soviet Hardware Modeling: Emulates iconic, historically significant Eastern European hardware rarely found in software—including the 6S45P triode tube preamplifier, the Elektronika 302-1 cassette recorder, and the Olimp MPK-005S reel-to-reel Hi-Fi machine.
• Component-Level Authenticity: Circuit-level matching against original hardware schematics and benchmark studio units (including four distinct UREI 1176 revisions and precision Teletronix LA-2A opto response curves).
• Specialized Microtonal Audio-to-MIDI: The revolutionary MELISMA engine captures continuous vocal, woodwind, and brass microtonal pitch contours, portamento, and quarter-tones without quantizing them to standard 12-tone semitone grids.
• Mastering Precision: Features strict true-peak brickwall limiting below -1 dBTP with ELBRUS L, and calibrated perceptual volume monitoring with the ST-100 VU meter.
• Creative Sound Design: Granular cloud synthesis (OBSIDIAN), one-knob anti-aliased saturation (PUMPKING), and multi-topology algorithmic reverb (AlgoReverb).

1. Chaika (v1.0.9) – Soviet High-Transconductance Tube Preamp:

   • Low-noise tube preamp modeled on the rare Soviet 6S45P (6С45П) triode.
   • Provides open, airy highs, tight low-end authority, and warm second-order harmonic coloration.
   • Includes a real-time hardware-style spectrum analyzer integrated directly into the front panel.

2. MELISMA (v1.0.10) – Continuous Microtonal Audio-to-MIDI Converter:

   • Tracks incoming monophonic pitch as a continuous contour line before segmenting into notes.
   • Preserves natural glissandi, expressive ornamentation (melismas), and quarter-tone intervals into exported MIDI data.
   • Specifically optimized for duduk, clarinet, zurna, human voice, and saxophone.

3. Olimp-005C (v1.0.9) – Soviet Reel-to-Reel Tape Saturator:

   • Circuit-level model built from the disassembled recording amplifiers, bias circuits, tape heads, and transport mechanics of the classic Soviet "Olimp MPK-005S" Hi-Fi tape machine.
   • Features gentle tape compression, two playback/record speeds, wow & flutter, tape hiss, and AC mains hum.

4. PEQ-1 (v2.0.1) – Photorealistic Passive Tube Equalizer:

   • Program equalizer engineered in the classic Pultec EQP-1A tradition.
   • Delivers musical passive inductor/capacitor curves, tube gain-stage saturation, and transformer weight.
   • Photorealistic interface with authentic hardware knobs and toggle switches.

5. E-302 (v1.0.3) – Elektronika 302-1 Portable Cassette Emulation:

   • Exact hardware emulation of the classic Soviet "Elektronika 302-1" portable mono cassette player.
   • Modeled strictly to factory specifications: 63 Hz – 10 kHz frequency band, 0.4% wow & flutter, 44 dB signal-to-noise ratio, 4.76 cm/s tape speed, Type I ferric tape formulation, and 120 µs pre-emphasis curves.

6. ARARAT 2A (v1.0.5) – Optical Compressor / Leveler:

   • Authentic optical leveling amplifier modeled after the Teletronix LA-2A.
   • Calibrated and verified against four physical/benchmark hardware units for exact T4B photocell release times and program-dependent smoothing.

7. ARAGATS 76 (v1.0.0) – Classic FET Limiting Amplifier:

   • Discrete FET compressor modeled directly from original 1176 schematics.
   • Features 4 distinct hardware revisions, each incorporating its own input/output transformer coloration, attack behaviors, and legendary "All-Buttons-In" (British mode) ratio characteristics.

8. ELBRUS L (v1.0.2) – True Peak Mastering Limiter:

   • Transparent brickwall mastering limiter engineered with advanced inter-sample peak detection.
   • Enforces a strict ceiling below -1 dBTP across high-transient program material where conventional limiters produce inter-sample overs.

9. PUMPKING (v1.0.0) – One-Knob Saturation & Harmonic Drive:

   • Single-dial saturation processor scaling from subtle low-mid warmth to thick, aggressive drive and density.
   • Employs internal oversampling to eliminate high-frequency aliasing and foldback distortion.

10. AlgoReverb (v1.1.0) – Multi-Network Algorithmic Reverb:

    • Algorithmic space processor featuring five distinct delay network topologies (Feedback Delay Networks) rather than simple preset variations of a single algorithm.

11. OBSIDIAN (v1.0.0) – Granular Texture Processor & Cloud Looper:

    • Breaks incoming audio into a dense cloud of micro-grains.
    • Features a freeze/infinite looper buffer, stereo voice detuning, grain pitch-shifting, and reverse playback sweeps.

12. Clipper (v1.0.2) – Anti-Parallel Diode Soft/Hard Clipper:

    • Modeled anti-parallel diode circuit delivering a solid, musical dynamic ceiling for taming aggressive transients on drum busses and mix groups.

13. ST-100VU (v1.0.0) – Analog Perceptual Volume Meter:

    • Dual analog-modeled VU meters calibrated to human RMS perceptual loudness (300 ms ballistic rise time) to optimize gain staging across the mix.

14. BAZALT (v1.0.0) – Creative Multi-Effect Processor:

    • Versatile creative effector combining modulation, filtering, and spatial transformation.

15. FiLLIN (v0.1.0) – Smart Transition & Audio Fill Generator:

    • Dynamic performance tool designed to capture and generate four-second rhythmic stutter stops and arrangement fill transitions.

• Plugin Formats: VST3, Standalone executables (64-bit)
• Audio Engine: 64-bit internal floating-point DSP
• Sample Rate Support: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Channel Routing: Mono, Stereo Interleaved

Supported Digital Audio Workstations:

• Image-Line FL Studio 20 / 21 / 2026
• Ableton Live 11 / 12
• Steinberg Cubase / Nuendo
• PreSonus Studio One
• Cockos REAPER
• Bitwig Studio
• Cakewalk by BandLab

Standard Automated Setup:

1. Close your DAW and any active VST3 hosts.
2. Run the provided installer executable as Administrator (Right-click -> Run as administrator).
3. The release is pre-cured with the applied ItUsed patch; complete the setup wizard and launch your DAW.

Manual Update / Selective Installation (from Official Builds):

1. Download the official installer directly from the developer's portal.
2. Install the official core content / libraries.
3. Launch the installer from this distribution package as Administrator.
4. Uncheck / disable the main global "plugins" component.
5. In the component list below, select only the specific products you wish to install/update (e.g., Chaika, MELISMA, Olimp-005C).
6. Complete installation and rescan your VST3 plugin folder in your DAW.